manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 142 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 142

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Turn adjusting screw -arrow- to set height. No provision is made for lateral adjustment.

5 - Side-mounted turn signal indicators

5.1 - Side-mounted turn signal indicators

Attention:

◆ Disconnect battery earth strap before working on electrical system.

◆ On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting

battery.=>Radio, Telephone, Navigation; Repair Group 91

- Heed (if necessary obtain) code for vehicles with encoded radio/radio navigation system (RNS).

- Disconnect battery earth strap with ignition switched off.

Note:

Action to be taken after re-connecting power supply => Page 

  7

 .

5.2 - Removing and installing side-mounted turn signal indicator

Removing

- -> Press turn signal indicator in direction of travel against retainer

-arrow- and remove carefully from wing penetration.

- Pull housing for side-mounted turn signal indicator off bulb holder.

Note:

Fig. shows vehicle as of Model Year 2001.

Installing

Install in reverse order.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

134

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов