manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 51 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 51

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

3 - Removing and installing starter

3.1 - Removing and installing starter

Attention:

◆ Disconnect battery earth strap before working on electrical system.

◆ On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting

battery.=>Radio, Telephone, Navigation; Repair Group 91

- Heed (if necessary obtain) code for vehicles with encoded radio/radio navigation system (RNS).

- Disconnect battery earth strap with ignition switched off.

Note:

Action to be taken after re-connecting power supply => Page 

  7

 .

3.2 - Vehicles with 4-cylinder petrol engine

Removing

- Remove engine cover.

- Remove battery => Page 

 2

 onwards.

- -> Remove battery carrier -arrows-.

- -> Unplug connector -1-.

- Unclip connector from cable guide.

- Detach wires -2- and -3- at starter.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

3.1 - Removing and installing starter 

43

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов