manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 175 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 175

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- Insert mirror adjuster in top part of recessed handle moulding and press on retaining frame until fasteners

engage.

1.12 - Removing and installing window lifter switch - 3-door model

Removing

- Remove front door trim.

=> General Body Repairs, Interior; Repair Group 70

- -> Use small screwdriver to carefully release fasteners -arrows-.

- Press window lifter switch downwards out of door trim.

Installing

Install in reverse order, paying attention to the following:

- Press window lifter switch into switch mount until fasteners engage.

1.13 - Removing and installing driver's window lifter switch - 5-door model

Removing

- -> Screw out bolt -arrow-.

- Release top part of recessed handle moulding -1- and detach.

- Unplug connectors.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

1.11 - Removing and installing mirror adjustment switch - 5-door model 

167

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов