manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 104 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 104

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Both sides (continued):

- Use adhesive tape to mask area beneath turn signal indicator, beneath headlight and at radiator grille as

protection for paintwork.

- -> Release catch -1- at turn signal indicator housing with cross-head screwdriver -2- by giving 1/4 turn to

left.

- Squeeze catch and slide turn signal indicator housing to front -arrow- out of guide.

- -> Screw out bolts -arrows-.

- -> Slide headlight slightly towards wing -arrow 1- and then swivel out headlight -arrow 2-.

- Unplug connectors.

- Take headlight to front out of body.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

96

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов