manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 184 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 184

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Removing
- -> Unclip lens at interior light/reading light -arrows-.

- -> Take bulb -2- (12 V, 10 W) for interior light out of clamp-type holder.

- Twist bulb -1- or -3- (12 V, 5 W) for reading light out of holder.

Installing
Install in reverse order, paying attention to the following:
- Press on lens for interior light/reading light until it engages.

3.4 - Removing and installing front interior light/reading light - as of Model Year 2000

Special tools and workshop equipment required
◆ Hook for front end 3370

Audi A3 1997 ➤

Electrical system - Edition 10.2003

176

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов