manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 131 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 131

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Installing

Install in reverse order, paying attention to the following:

- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.

- Secure bulb with spring clip.

- Re-attach connector and close housing cover.

2.13 - Replacing side light bulb (gas-discharge headlight)

• Preparation for bulb replacement => Page 

 120

Removing

- Detach cover from headlight housing.

- -> Pull holder -arrow- out of housing.

- Pull side light bulb out of holder.

Installing

Install in reverse order, paying attention to the following:

- Insert new bulb in holder, taking care not to touch glass bulb with bare hands.

- Press holder into reflector until it is felt to engage.

- Close housing cover.

2.14 - Replacing turn signal indicator bulb

• Preparation for bulb replacement => Page 

 120

Audi A3 1997 ➤

Electrical system - Edition 10.2003

2.12 - Replacing main beam bulb (gas-discharge headlight) 

123

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов