manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 187 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 187

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Take bulb -1- or -2- (12 V, 10 W) out of clamp-type holder.

Installing
Install in reverse order, paying attention to the following:
- Press on lens for interior light until it engages.

3.6 - Replacing bulbs for front reading light - as of Model Year 2000

Special tools and workshop equipment required
◆ Hook for front end 3370

Removing
- -> Use special tool 3370 to carefully pull off cover for reading light.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

3.5 - Replacing bulbs for front interior light - as of Model Year 2000 

179

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов