manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 28 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 28

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Removing
Vehicles with 1.6 l engine:
- Prise plugs out of cover in front of intake manifold.

- -> Remove engine cover and cover in front of intake manifold -arrows-.

Note:
Fig. shows bolted-on engine cover.

Vehicles with 1.8 l engine:
- -> Remove engine cover -arrows-.

All models:
Note:
Before removing, mark direction of ribbed belt with chalk or felt-tipped pen. Running a used belt in the opposite

direction could destroy it.
- -> Swivel tensioner in direction of arrow to slacken off ribbed belt.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

20

 27 - Starter, Current supply

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов