manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 133 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 133

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Removing

- Remove headlight => Page 

 114

 .

- -> Release headlight range control motor: At right headlight by turning anti-clockwise; at left headlight by

turning clockwise -arrow-

- By tilting control motor, push ball end of positioning stem out of socket.

- Detach cover from headlight housing.

- -> Unplug connector -1- at gas-discharge lamp by turning anti-clockwise -arrow-.

- -> Unplug connector -3- at main beam bulb.

- Disengage spring clip -2- and take bulb -1- out of housing.

- -> Turn adjuster -3- until headlight reflector is swivelled completely forwards.

- Unclip cable guide -2- from inside.

- Unplug connector -1-.

Installing

Install in reverse order, paying attention to the following:

Audi A3 1997 ➤

Electrical system - Edition 10.2003

2.16 - Removing and installing gas-discharge lamp starter unit -N195 

125

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов