manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 161 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 161

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- Heed (if necessary obtain) code for vehicles with encoded radio/radio navigation system (RNS).

- Disconnect battery earth strap with ignition switched off.

Note:

Action to be taken after re-connecting power supply => Page 

  7

 .

Attention: High voltage

On vehicles with gas-discharge headlights, always disconnect battery earth strap before working on gas-dis‐

charge headlight components marked with yellow high-voltage symbols.

12.2 - Exploded view of automatic headlight range control

1 Left/right headlight range control motor -V48/V49

2 Front left vehicle level sender -G78

◆ At front left link

◆ Removing and installing:

=> Running Gear, Front-wheel Drive and Four-wheel Drive; Repair Group 40

Audi A3 1997 ➤

Electrical system - Edition 10.2003

12.1 - Servicing automatic headlight range control 

153

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов