manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 186 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 186

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Screw out bolts -1- and -2-.

- Release retainer tabs -arrows- and take interior light/reading light out of roof opening.

- Unplug connectors.

Installing
Install in reverse order, paying attention to the following:
- Engage interior light and tighten to 1 Nm.

- Press on cover for reading lights and lens for interior light until they engage.

3.5 - Replacing bulbs for front interior light - as of Model Year 2000

Removing
- -> Unclip lens at interior light -arrows-.

- -> Disengage small lenses -1- and -2- over bulbs.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

178

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов