manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 150 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 150

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Carefully release upper fasteners -arrows-.

- Carefully release lower fasteners and detach housing of coil connector with slip ring and steering angle

sender from steering column switch.

Attention:

Coil connector with slip ring must not be turned out of centre position (secure in installation position using

adhesive tape).

- -> Slacken off bolt -arrow- of clamp until steering column switch can be detached.

- Unplug connectors for steering column switch.

Installing

Install in reverse order, paying attention to the following:

- Slide housing of coil connector with slip ring and steering angle sender onto steering column switch until all

fasteners are heard to engage.

- Break off transportation protection to remove/detach adhesive securing tape.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

142

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов