manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 188 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 188

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Twist bulb -1- or -2- (12 V, 5 W) out of holder.

Installing

Install in reverse order, paying attention to the following:

- Press on cover for reading light until it engages.

3.7 - Removing and installing rear interior light - up to Model Year 1999

Special tools and workshop equipment required

◆ Hook for front end 3370

Removing

- -> Use special tool 3370 to carefully pull interior light out of roof opening.

- Unplug connector.

Installing

Install in reverse order, paying attention to the following:

- Insert interior light/reading light in roof opening and engage.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

180

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов