manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 197 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 197

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

97 - Wiring

1 - Relay carriers, fuse carriers

1.1 - Relay carriers, fuse carriers

Attention:

◆ Disconnect battery earth strap before working on electrical system.

◆ On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting

battery.=>Radio, Telephone, Navigation; Repair Group 91

- Heed (if necessary obtain) code for vehicles with encoded radio/radio navigation system (RNS).

- Disconnect battery earth strap with ignition switched off.

Note:
Action to be taken after re-connecting power supply => Page 

  7

 .

1.2 - Removing and installing fuse box for main fuse

Removing
- Lay bare battery posts => Page 

 2

 onwards.

- Open cover of main fuse box.

- -> Unscrew nut -1-.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

1.1 - Relay carriers, fuse carriers 

189

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов