manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 168 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 168

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

=> General Body Repairs, Interior; Repair Group 68

1.3 - Removing and installing switches in centre console - as of Model Year 2001

Removing

- Remove radio/monitor navigation system.

=> Radio, Telephone, Navigation; Repair Group 91

- -> Unclip trim for switch module -arrows-.

- Detach trim for switch module.

- -> Use flat screwdriver to carefully prise corresponding switch out of mount -arrows-.

- Unplug connector.

Installing

Install in reverse order, paying attention to the following:

- Plug in connector.

- Press switch into mount in dash panel and engage.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

160

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов