manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 171 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 171

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Removing

- -> Press light switch -arrow 1- and at the same time turn it to right

-arrow 2-.

- Hold switch in this position and pull it out of housing -arrow 3-.

- Unplug connector.

Installing

Install in reverse order, paying attention to the following:

- Press switch into switch housing until catch engages.

1.7 - Removing and installing adjuster for manual headlight range control

Removing

- Remove light switch => Page 

 162

 .

- -> Use small screwdriver to carefully release fasteners -arrows-.

- Pull headlight range control adjuster -1- to rear out of light switch housing -2-.

- Unplug connector.

Installing

Install in reverse order.

1.8 - Removing and installing switch for glove box light

Audi A3 1997 ➤

Electrical system - Edition 10.2003

1.6 - Removing and installing light switch 

163

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов