manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 174 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 174

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

1.11 - Removing and installing mirror adjustment switch - 5-door model

Removing

- -> Screw out bolt -arrow-.

- Release top part of recessed handle moulding -1- and detach.

- Unplug connectors.

- -> Use small screwdriver to carefully release fasteners -arrows- at retaining frame -1-.

- Pull mirror adjustment switch out of top part of recessed handle moulding.

- -> Separate mirror adjustment switch -1- from trim -2- (release fastener -A-).

Installing

Install in reverse order, paying attention to the following:

- Press mirror adjustment switch into mirror adjustment trim until fasteners engage.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

166

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов