manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 140 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 140

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

All models:

- -> Screw out bolts -arrows-.

- Disengage and take out headlamp insert.

- Unplug connector.

Installing

Install in reverse order, paying attention to the following:

- Engage fog light on inside at bumper.

- Adjust fog light => Page 

 133

 .

Tightening torque

Component

Nm

Fog light housing to bumper

5

4.3 - Replacing fog light bulbs

Removing

- Remove fog light => Page 

 131

 .

- -> Release cover -1- by turning anti-clockwise -arrow- and detach cover.

- -> Unplug connector -2-.

- Disengage spring clip -1- and take bulb out of housing.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

132

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов