manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 50 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 50

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

2.10 - Removing and installing ribbed belt pulley with free-wheel

Special tools and workshop equipment required

◆ Multi-point adapter 3400

Removing

- -> Support pulley with multi-point adapter 3400 and turn alternator shaft clockwise.

Installing

Install in reverse order, paying attention to the following:

- Turn alternator shaft anti-clockwise.

- Clip protective cap onto free-wheel pulley.

Tightening torque

Component

Nm

Ribbed belt pulley with free-wheel to alternator

80

Audi A3 1997 ➤

Electrical system - Edition 10.2003

42

 27 - Starter, Current supply

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов