manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 42 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 42

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Installing

Install in reverse order, paying attention to the following:

- To facilitate positioning of alternator, drive back bushings for retaining bolts slightly.

Vehicles with air conditioner:

- -> To facilitate positioning of air conditioner compressor, drive back threaded bushes -B- for retaining bolts

-A- slightly in direction of arrow.

All models:

- Make sure ribbed belt is properly positioned and correctly routed.

- -> Ribbed belt routing on vehicles with no air conditioner

Audi A3 1997 ➤

Electrical system - Edition 10.2003

34

 27 - Starter, Current supply

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов