manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 49 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 49

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

2.9 - Removing and installing ribbed belt pulley without free-wheel

Special tools and workshop equipment required

◆ Socket attachment 3310

Removing

- -> Support nut with socket attachment 3310 and turn alternator shaft clockwise.

- Detach ribbed belt pulley.

Installing

Install in reverse order, paying attention to the following:

- Turn alternator shaft anti-clockwise.

Tightening torque

Component

Nm

Ribbed belt pulley to alternator

65

Audi A3 1997 ➤

Electrical system - Edition 10.2003

2.9 - Removing and installing ribbed belt pulley without free-wheel 

41

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов