manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 190 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 190

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Removing

- -> Use special tool 3370 to carefully pull interior light/reading light out of opening in headliner.

- Unplug connector.

Installing

Install in reverse order, paying attention to the following:

- Insert interior light/reading light in roof opening and engage.

3.10 - Replacing bulb for rear interior light/reading light - as of Model Year 2000

Removing

- Remove rear interior light/reading light => Page 

 181

 .

- -> Twist bulb 12 V, 5 W -arrow- on back of reading light out of holder.

Installing

Install in reverse order.

3.11 - Removing and installing luggage compartment lights

Notes:

◆ Bulb replacement involves removing luggage compartment lights.

◆ Bulb for luggage compartment light: 12 V, 5 W

Audi A3 1997 ➤

Electrical system - Edition 10.2003

182

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов