manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 130 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 130

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

Removing

- Remove headlight => Page 

 114

 .

- Detach cover from headlight housing.

- -> Unplug connector -1- at gas-discharge lamp by turning anti-clockwise -arrow-.

- -> Detach retaining ring -1- for gas-discharge lamp by turning anti-clockwise -arrow-.

- Pull gas-discharge lamp out of headlight housing.

Installing

Install in reverse order, paying attention to the following:

Notes:

◆ Heed installation position: Lug at top of bulb holder must engage in recess of bulb.

◆ Retaining ring can only be fitted in one position.

- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.

- Secure gas-discharge lamp with retaining ring.

- Re-attach connector and close housing cover.

- Install headlight => Page 

 115

 .

2.12 - Replacing main beam bulb (gas-discharge headlight)

• Preparation for bulb replacement => Page 

 120

Removing

- Detach cover from headlight housing.

- -> Unplug connector -3- at main beam bulb.

- Disengage spring clip -2- and take bulb -1- out of housing.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

122

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов