manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 13 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 13

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Screw out hexagon bolt -1- at battery bracket -2-.

- Pull battery out of fastening strip of battery bracket.

- Lift battery out of engine compartment.

- Install battery => Page 

 7

 .

1.5 - Removing battery - Audi S3

Removing

Attention:

On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting

battery.=>Radio, Telephone, Navigation; Repair Group 91

- Heed (if necessary obtain) code for vehicles with encoded radio/radio navigation system (RNS).

- Switch off ignition.

- -> If fitted, remove front left cover -arrows-.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

1.4 - Removing battery - Audi A3 as of Model Year 2001 

5

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов