manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 170 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 170

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Use small screwdriver to carefully release fasteners -arrows-.

- Take out seat heating switch.

Vehicles with air conditioner:
On vehicles with air conditioner, front seat heating switches are integrated into operating and display unit -E87.
- Remove air-conditioner operating element.

=> Air Conditioner; Repair Group 87
- -> Use small screwdriver to carefully release fasteners -arrows-.

- Take seat heating switches -1- and -2- out of air conditioner operating element -1-.

Installing
Install in reverse order, paying attention to the following:
- Plug in connector.

- Press switch into mount and engage.

1.6 - Removing and installing light switch

Audi A3 1997 ➤

Electrical system - Edition 10.2003

162

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов