manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 160 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 160

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- Lift out warning buzzer.

Note:
Fig. shows 3-door model.
Installing
Install in reverse order.
Tightening torques

Component

Nm

Parking aid warning buzzer to holder

1.5

Holder to body

1.5

11.5 - Removing and installing rear parking aid sender

Fitting location: In bumper (on back)

Removing
- -> Unplug connector -1- at sender.

- Press both retainer tabs aside -arrows- and press out sender inwards.

Note:
Second mechanic may be required to press disengaged senders inwards.

Installing
Install in reverse order.

12 - Servicing automatic headlight range control

12.1 - Servicing automatic headlight range control

Attention:

◆ Disconnect battery earth strap before working on electrical system.

◆ On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting

battery.=>Radio, Telephone, Navigation; Repair Group 91

Audi A3 1997 ➤

Electrical system - Edition 10.2003

152

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов