manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 176 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 176

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

- -> Use small screwdriver to carefully release fasteners -A-.

- Pull window lifter switch -1- downwards out of mount -2-.

Installing

Install in reverse order, paying attention to the following:

- Press window lifter switch into switch mount until fasteners engage.

1.14 - Removing and installing front passenger's window lifter switch - 5-door model

Removing

- -> Screw out bolt -arrow-.

- Release top part of recessed handle moulding -1- and detach.

- Unplug connector.

- -> Use small screwdriver to carefully release fasteners -2-.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

168

 96 - Lights, Lamps, Switches - interior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов