manualshive.com logo in svg

Audi A3 1997, Сервисная инструкция, Страница: 112 / 205

Поделиться
Скачать
Audi A3 1997 Скачать руководство пользователя страница 112

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

◆ Retaining ring can only be fitted in one position.

- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.

- Secure gas-discharge lamp with retaining ring.

- Re-attach connector and close housing cover.

- Install headlight => Page 

 97

 .

1.12 - Replacing main beam bulb (gas-discharge headlight)

• Preparation for bulb replacement => Page 

 101

Removing
- Detach cover from headlight housing.

- -> Unplug connector -3- at main beam bulb.

- Disengage spring clip -1- and take bulb -2- out of housing.

Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.

- Secure bulb with spring clip.

- Re-attach connector and close housing cover.

1.13 - Replacing side light bulb (gas-discharge headlight)

• Preparation for bulb replacement => Page 

 101

Removing
- Detach cover from headlight housing.

Audi A3 1997 ➤

Electrical system - Edition 10.2003

104

 94 - Lights, Lamps, Switches - exterior

Содержание A3 1997














































































































































































































Отзывы:

Нет отзывов