Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- Pull out steering wheel with adjuster as far as it will go and tilt it downwards.
- -> Pull off surround -1- in direction of arrow.
- -> Screw out bolts -arrows-.
- Pull out dash panel insert to front.
- If fitted, cut open cable ties on back of dash panel insert.
- -> Release catches of connectors -arrow- and unplug connectors.
Installing
Install in reverse order, paying attention to the following:
- After installation, check operation of dash panel insert.
- If operation is OK, enter input values for dash panel insert:
=> Electrical System Self-diagnosis; Repair Group 01; Self-diagnosis of dash panel insert up to Model Year
1999 Self-diagnosis of dash panel insert up to Model Year 1999
1.4 - Assignment of dash panel insert lamps - Model Year 1997
Note:
With three exceptions, all warning lamps are fitted with light-emitting diodes. Dash panel insert must be replaced
in the event of failure of warning lamp with LED.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
1.3 - Removing and installing dash panel insert
49