Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- Disengage spring clip -3- and take bulb -1- out of housing.
Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Secure bulb with spring clip.
- Re-attach connector and close housing cover.
- Adjust fog light => Page
97
.
3.4 - Adjusting fog lights (halogen headlights)
Specifications for fog light adjustment:
=> Maintenance
On vehicles with halogen headlights, fog lights are integrated into main beam of main headlights => Adjusting
headlights, Page
97
.
3.5 - Removing and installing fog lights (gas-discharge headlights)
Removing
- -> Pull off trim in lower section of bumper -arrow-.
- -> Screw out bolts -arrows-.
- Disengage and take out headlamp insert.
- Unplug connector.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
128
94 - Lights, Lamps, Switches - exterior