manualshive.com logo in svg

Siemens SINAMICS S150, Operating Instructions Manual

The Siemens SINAMICS S150, a powerful drive system, revolutionizes industrial automation. With its excellent performance and advanced features, this product guarantees seamless operations. Enhance your experience with the Operating Instructions Manual, available for free download from our website, empowering you to unleash the full potential of this exceptional device.

Share
Download
background image

Table of contents 

 

  

 

Drive converter cabinet units 

12

 

Operating Instructions, 07/07, A5E00288214A 

9.4.6.6  Traversing to fixed stop............................................................................................................. 390 

9.4.6.7  Direct setpoint specification (MDI) ............................................................................................ 393 

9.4.6.8  Jog............................................................................................................................................. 396 

9.4.6.9  Status signals............................................................................................................................ 397 
9.5 

Monitoring and protective functions .......................................................................................... 400 

9.5.1 

Protecting power components................................................................................................... 400 

9.5.2 

Thermal monitoring and overload responses............................................................................ 401 

9.5.3 

Blocking protection.................................................................................................................... 403 

9.5.4 

Stall protection (only for vector control) .................................................................................... 404 

9.5.5 

Thermal motor protection.......................................................................................................... 405 

10 

Diagnosis / faults and alarms................................................................................................................. 407 
10.1 

Chapter content......................................................................................................................... 407 

10.2 

Diagnosis................................................................................................................................... 408 

10.2.1  Diagnostics via LEDs ................................................................................................................ 409 

10.2.2  Diagnostics via parameters....................................................................................................... 416 

10.2.3  Indicating and rectifying faults................................................................................................... 420 
10.3 

Overview of warnings and faults ............................................................................................... 421 

10.3.1  "External alarm 1" ..................................................................................................................... 421 

10.3.2  "External fault 1"........................................................................................................................ 422 

10.3.3  "External fault 2"........................................................................................................................ 422 

10.3.4  "External fault 3"........................................................................................................................ 422 
10.4 

Service and support .................................................................................................................. 423 

11 

Maintenance and servicing .................................................................................................................... 425 
11.1 

Chapter content......................................................................................................................... 425 

11.2 

Maintenance.............................................................................................................................. 426 

11.2.1  Cleaning .................................................................................................................................... 426 
11.3 

Maintenance.............................................................................................................................. 427 

11.3.1  Installation device...................................................................................................................... 428 

11.3.2  Using crane lifting lugs to transport power blocks .................................................................... 429 
11.4 

Replacing components.............................................................................................................. 431 

11.4.1  Replacing the filter mats............................................................................................................ 431 

11.4.2  Replacing the power block (frame size FX) .............................................................................. 432 

11.4.3  Replacing the power block (frame size GX).............................................................................. 434 

11.4.4  Replacing the power block (frame size HX).............................................................................. 436 

11.4.5  Replacing the power block (frame size JX)............................................................................... 440 

11.4.6  Replacing the Control Interface Board (frame size FX) ............................................................ 442 

11.4.7  Replacing the Control Interface Board (frame size GX) ........................................................... 444 

11.4.8  Replacing the Control Interface Board (frame size HX)............................................................ 446 

11.4.9  Replacing the Control Interface Board (frame size JX) ............................................................ 448 

11.4.10  Replacing the fan (frame size FX) ............................................................................................ 450 

11.4.11  Replacing the fan (frame size GX)............................................................................................ 452 

11.4.12  Replacing the fan (frame size HX) ............................................................................................ 454 

11.4.13  Replacing the fan (frame size JX)............................................................................................. 458 

11.4.14  Replacing the fan in the Active Interface Module (frame size FI) ............................................. 460 

11.4.15  Replacing the fan in the Active Interface Module (frame size GI)............................................. 462 

11.4.16  Replacing the fan in the Active Interface Module (frame size HI)............................................. 464 

11.4.17  Replacing the fan in the Active Interface Module (frame size JI).............................................. 466 

11.4.18  Replacing the fan fuses (-A2 -F101/F102, -G1 -F10/F11, -U1 -F10/F11) ................................ 468 

11.4.19  Replacing the fuses for the auxiliary power supply (-A1 -F11 / -A1 -F12) ................................ 468 

11.4.20  Replacing the main fuses.......................................................................................................... 468 

Summary of Contents for SINAMICS S150









































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SINAMICS S150

Tsino Dynatron EtherCAT CoolDrive RC Series User Manual preview
EtherCAT CoolDrive RC Series
Brand: Tsino Dynatron Pages: 278
Alpha AS600M Series Manual preview
AS600M Series
Brand: Alpha Pages: 97
Minarik HTL05-D-4Q Quick Start Manual preview
HTL05-D-4Q
Brand: Minarik Pages: 2
ThyssenKrupp DAF 330 Operating Manual preview
DAF 330
Brand: ThyssenKrupp Pages: 52
Festo CMMT-AS-C12-11A-P3-EC-S1 Operating Instructions Manual preview
CMMT-AS-C12-11A-P3-EC-S1
Brand: Festo Pages: 16
Bosch Divar 2 Installation Manual preview
Divar 2
Brand: Bosch Pages: 80
NCR 7403-K240 Instructions preview
7403-K240
Brand: NCR Pages: 5
Welcon WE2S D024 FS0057 Series Hardware Manual preview
WE2S D024 FS0057 Series
Brand: Welcon Pages: 25
PR electronics 5203B Manual preview
5203B
Brand: PR electronics Pages: 30
ICAN SEH400RB Instruction Book preview
SEH400RB
Brand: ICAN Pages: 17
ABB ACS355 series Supplement Manual preview
ACS355 series
Brand: ABB Pages: 28
ABB ACH580-01 Series Hardware Manual preview
ACH580-01 Series
Brand: ABB Pages: 396
ABB ACS880-07CLC User Manual preview
ACS880-07CLC
Brand: ABB Pages: 40
Danaher Motion S200-VTS Product Manual preview
S200-VTS
Brand: Danaher Motion Pages: 140
Danfoss AME 25 SU Operating Manual preview
AME 25 SU
Brand: Danfoss Pages: 16
YASKAWA L1000H Quick Start Manual preview
L1000H
Brand: YASKAWA Pages: 54
Magnetek HPV1000 Start Manual preview
HPV1000
Brand: Magnetek Pages: 7
Eaton 9000X User Manual preview
9000X
Brand: Eaton Pages: 156

Brands by name

Popular brands

Load more brands