Mechanical installation
3.2 Transportation and storage
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
31
Note
Notes regarding damage in transit
•
Carry out a thorough visual inspection of the device before accepting the delivery from
the shipping company.
•
Check that you have received all the items specified on the delivery note.
•
Notify the shipping company immediately of any missing components or damage.
•
If you identify any hidden defects or damage, contact the shipping company immediately
and ask them to examine the device.
•
If you fail to contact them immediately, you may lose your right to claim compensation for
the defects and damage.
•
If necessary, you can request the support of your local Siemens office.
WARNING
Damage in transit indicates that the device has been subject to unreasonable stress. The
electrical safety of the device can no longer be ensured. It must not be connected until a
thorough high-voltage test has been carried out.
Non-observance can result in death, severe personal injury or substantial property damage.
Storage
The devices must be stored in clean, dry rooms. Temperatures between –25°C and +70°C
are permissible. Temperature variations greater than 20 K per hour are not permitted.
If the device is stored for a prolonged period once it has been unpacked, cover it or take
other appropriate measures to ensure that it does not become dirty and that it is protected
against environmental influences. Failure to take such measures will invalidate any claims
for damages under the terms of the warranty.
WARNING
The device should not be stored for more than two years. If the device is stored for more
than two years, its DC link capacitors must be reformed during commissioning.
The reforming procedure is described in "Maintenance and servicing".
