![background image](http://html.mh-extra.com/html/siemens/sinamics-s150/sinamics-s150_operating-instructions-manual_378226101.webp)
Electrical installation
4.9 Other connections
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
101
For encoders with a 5 V supply at X521/X531, the cable length is dependent on the encoder
current (this applies cable cross-sections of 0.5 mm²):
(QFRGHUSRZHUFRQVXPSWLRQ>$@
&DEOHOHQJWK>P@
Figure 4-19 Signal cable length as a function of the sensor current consumption