Siemens 7SJ82, Manual

Page: 270 / 1638

No. Information Data Class
(Type) Type
Sensor 9
_:11619:52 Sensor 9:Health ENS O
_:11619:60 Sensor 9:Failure SPS O
_:11619:80 Sensor 9:TmpOut MV O
Sensor 10
_:11611:52 Sensor 10:Health ENS O
_:11611:60 Sensor 10:Failure SPS O
_:11611:80 Sensor 10:TmpOut MV O
Sensor 11
_:11611:52 Sensor 11:Health ENS O
_:11611:60 Sensor 11:Failure SPS O
_:11611:80 Sensor 11:TmpOut MV O
Sensor 12
_:11611:52 Sensor 12:Health ENS O
_:11611:60 Sensor 12:Failure SPS O
_:11611:80 Sensor 12:TmpOut MV O
Communication with RTD Unit
Integration of a Serial RTD Unit (Ziehl TR1200)
Connection of the Communication Lines
Figure 5-62 shows how you connect the RTD box to the SIPROTEC 5 device. Note that Pin 1 of the RJ45 plug is
connected to RTD-B and Pin 2 is connected to RTD-A.
[dwverbau-201112-01.tif, 1, en_US]
Figure 5-62 Connection of the RTD Unit to the SIPROTEC 5 Device
Adding a USART Module
Add a USART-AB-1EL or a USART-AC-2EL USART module in DIGSI to the device. The USART module must be
inserted at one of the plug-in positions for communication modules in the base module or in the CB202
expansion module (refer to the following figure).
5.6.9
5.6.9.1
Function-Group Types
5.6 Function-Group Type Analog Units
270 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017