Siemens 7SJ82, Manual

Page: 266 / 1638

Parameter: Temperature unit
To change the display and evaluation of measured temperature values from °C to °F, adapt the DIGSI user
default settings accordingly.
Proceed as follows:
•
In DIGSI select the menu item Extras --> Settings.
•
In the Settings view select the menu item DIGSI 5 User preferences.
•
Under Standard unit system change the setting value of the unit system used from
SI units
to
US
units
.
[scfahrht-190214-01, 1, en_US]
Figure 5-61 Change of the Display Between °C and °F
The following settings and information table shows only 1 of the 12 sensors, as the setting possibilities of the
12 sensors do not differ.
Settings
Addr. Parameter C Setting Options Default Setting
General
_:2311:103 General:Port
•
port E
•
port F
•
port J
•
port N
•
port P
port J
Sensor 1
_:11611:102 Sensor 1:Sensor type
•
Pt 100
•
Ni 100
•
Ni 120
Pt 100
Information List
No. Information Data Class
(Type) Type
General
_:2311:53 General:Health ENS O
_:2311:56 General:Failure SPS O
5.6.7.7
5.6.7.8
Function-Group Types
5.6 Function-Group Type Analog Units
266 SIPROTEC 5, Overcurrent Protection, Manual
C53000-G5040-C017-8, Edition 07.2017