Remote Commands
R&S
®
FPL1000
943
User Manual 1178.3370.02 ─ 11
Note that the items, separated by commas, have to be written
into one string (see example below).
The available items depend on the application you are using.
See the tables below for a short description of each item.
Per default, some items are selected (see tables below).
Example:
HCOP:TREP:ITEM:SEL 'SETT,MARK,SRES,DIAG'
The selection is applied to the currently selected channel.
Example:
HCOP:TREP:ITEM:SEL SAN,'SETT,LISN'
A dataset in the Spectrum application consists of the general
instrument and measurement settings and the LISN settings.
Manual operation:
See
Table 10-10: Available <ChannelTypes>
<ChannelType>
Description
SAN
Spectrum
Table 10-11: Available <items> in spectrum application
<Item>
Description
Default
DIAGram
Screenshot of the scan results.
x
MARKers
Contents of the marker table.
x
PEAKlist
Contents of the peak list.
x
RSUMmary
Contents of the result summary.
x
SETTings
Settings that have been used during a measurement.
x
SPECtrogram
Screenshot of the spectrogram.
x
RESultlist
List of trace point values.
TRANsducer
Characteristics of the transducer.
LISN
Information about LISNs.
HCOPy:TREPort:ITEM:TEMPlate:CATalog?
This command queries the test report templates available in the default report directory
(and its subdirectories).
Return values:
<Templates>
String containing the name of the templates as a comma-sepa-
rated list.
Example:
HCOP:TREP:ITEM:TEMP:CAT?
would return, e.g.:
'TemplateX, TemplateY, TemplateZ'
Usage:
Query only
Manual operation:
See
Managing Settings and Results
