Ronde & Schwarz 1304.0004K03, User Manual

Page: 739 / 1071

Remote Commands
R&S
®
FPL1000
739 User Manual 1178.3370.02 ─ 11
TRAC:DATA? TRACE4
//Returns one power value per sweep point for each trace.
TRAC:DATA:X?
//Returns one frequency value per sweep point for each trace.
10.7 Remote Commands for Result Displays
● Working with Windows in the Display ................................................................... 739
● Examples: Configuring the Result Display ............................................................746
10.7.1 Working with Windows in the Display
The following commands are required to change the evaluation type and rearrange the
screen layout for a channel setup as you do using the SmartGrid in manual operation.
Since the available evaluation types depend on the selected application, some param-
eters for the following commands also depend on the selected channel setup.
Note that the suffix <n> always refers to the window in the currently selected channel
setup .
(See
INSTrument[:SELect]
on page 609).
LAYout:ADD[:WINDow]?
................................................................................................. 739
LAYout:CATalog[:WINDow]?
............................................................................................ 740
LAYout:IDENtify[:WINDow]?
............................................................................................ 741
LAYout:MOVE[:WINDow]
................................................................................................ 741
LAYout:REMove[:WINDow]
............................................................................................. 742
LAYout:REPLace[:WINDow]
............................................................................................ 742
LAYout:SPLitter
..............................................................................................................742
LAYout:WINDow<n>:ADD?
............................................................................................. 744
LAYout:WINDow<n>:IDENtify?
........................................................................................ 744
LAYout:WINDow<n>:REMove
..........................................................................................745
LAYout:WINDow<n>:REPLace
........................................................................................ 745
LAYout:ADD[:WINDow]? <WindowName>,<Direction>,<WindowType>
This command adds a window to the display in the active channel setup.
This command is always used as a query so that you immediately obtain the name of
the new window as a result.
To replace an existing window, use the
LAYout:REPLace[:WINDow]
command.
Query parameters:
<WindowName> String containing the name of the existing window the new win-
dow is inserted next to.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the
LAYout:CATalog[:WINDow]?
query.
Remote Commands for Result Displays