manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 583

Network Operation and Remote Control

R&S

®

FPL1000

583

User Manual 1178.3370.02 ─ 11

●

"LAN Configuration" opens the menu with configuration pages.

●

"Status" displays information about the "LAN" status of the instrument.

LAN Configuration

The LAN configuration consists of three parts:

●

"IP configuration" provides all mandatory LAN parameters.

●

"Advanced LAN Configuration" provides further LAN settings.

●

"Ping Client" provides the ping utility to verify the connection between the instru-
ment and other devices.

IP Configuration

The "LAN Configuration > IP configuration" web page displays all mandatory LAN
parameters and allows their modification.

The "TCP/IP Mode" configuration field controls how the IP address for the instrument
gets assigned (see also 

Chapter 9.5.1.2, "How to Assign the IP Address"

,

on page 579).

For the manual configuration mode, the static IP address, subnet mask, and default
gateway are used to configure the LAN. The automatic configuration mode uses DHCP
server or Dynamic Link Local Addressing (Automatic IP) to obtain the instrument IP
address.

Changing the LAN configuration is password-protected. The default password is 

Lxi-

WebIfc

 (notice upper and lower case characters).

You can change the LAN password in the "N Remote" dialog box, see 

Chap-

ter 9.4.4, "LAN Settings"

, 

on page 573.

Advanced LAN Configuration

The "LAN Configuration > Advanced LAN Configuration" parameters are used as fol-
lows:

●

"mDNS and DNS-SD" are two additional protocols: Multicast DNS and DNS Ser-
vice Discovery. They are used for device communication in zero configuration net-
works working without DNS and DHCP

●

"ICMP Ping" must be enabled to use the ping utility.

●

"VXI-11" is the protocol that is used to detect the instrument in the LAN.

Ping Client

Ping is a utility that verifies the connection between the instrument and another device.
The ping command uses the 

ICMP

 echo request and echo reply packets to determine

whether the LAN connection is functional. Ping is useful for diagnosing IP network or
router failures. The ping utility is not password-protected.

To initiate a ping between the instrument and a second connected device:

How to Set Up a Network and Remote Control

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands