manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 523

General Instrument Setup

R&S

®

FPL1000

523

User Manual 1178.3370.02 ─ 11

The firmware on your R&S

 

FPL1000 may also need to be updated in order to enable

additional new features or if reasons for improvement come up. Ask your sales repre-
sentative or check the Rohde&Schwarz website for availability of firmware updates. A
firmware update package includes at least a setup file and release notes.

Before updating the firmware on your instrument, read the release notes delivered with
the firmware version.

Enter the name or browse for the firmware installation file and press the "Install" but-
ton.

Remote command:

SYSTem:FIRMware:UPDate

 

on page 971

How to Update the Instrument Firmware

1. Download the update package from the Rohde&Schwarz website and store it on a

memory stick, on the instrument, or on a server network drive that can be accessed
by the instrument.

2.

NOTICE! 

Stop measurement. The firmware update must not be performed during a

running measurement.
If a measurement is running, stop it by pressing the highlighted [Run Cont] or [Run
Single] key.

3. Select the [Setup] key.

4. Select the "System Config" softkey.

5. Select the "Firmware Update" tab.

6. In the file selection dialog box select the 

FPLSetup*.exe

 file.

System Configuration Settings

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands