Remote Commands
R&S
®
FPL1000
722
User Manual 1178.3370.02 ─ 11
10.6.14.4
Configuring EMI Limit Lines
The commands required to define limit lines for EMI measurements are described in
Chapter 10.8.9, "Configuring Display Lines"
10.6.14.5
Controlling LISN
The commands required to control a LISN are described here.
This feature requires the optional additional interfaces (R&S
FPL1-B5).
INPut<ip>:LISN:FILTer:HPASs[:STATe]
.............................................................................722
INPut<ip>:LISN:FILTer:HPASs[:STATe]
<State>
This command turns the 150 kHz highpass filter for the ENV216 network on and off.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<State>
ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
*RST:
0
Example:
//Turn on high pass filter
INP:LISN:TYPE ENV216
INP:LISN:FILT:HPAS ON
Manual operation:
See
INPut<ip>:LISN:PHASe
<Phase>
This command selects one LISN phase to be measured.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<Phase>
L1
L2
Available for networks with four phases (R&S
ESH2Z5,
R&S
ENV4200 and R&S
ENV432)
Configuring and Performing Measurements
