Ronde & Schwarz 1304.0004K03, User Manual

Page: 660 / 1071

Remote Commands
R&S
®
FPL1000
660 User Manual 1178.3370.02 ─ 11
<ri> 1..n
Selects the SEM range.
<li> 1..n
Power class for which the limit is defined.
Parameters:
<Level> Relative limit at the stop frequency of a SEM range.
Range:
-400 to 400
*RST: -50
Default unit: dBc
Example: SENSe:ESPectrum:RANGe:LIMit:RELative:STOP -15
For a detailed example see Chapter 10.6.7.10, "Example: SEM
Measurement" , on page 674.
Manual operation: See "Rel Limit Start / Stop <n>" on page 177
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STOP:ABS <Level>
This command defines an absolute limit for the MAX function of the relative limit for a
SEM range.
For more information see "Relative limit line functions" on page 167.
Suffix:
<sb>
.
1 to 3
<ri> 1..n
Selects the SEM range.
<li> 1..n
Power class for which the limit is defined.
Parameters:
<Level> Absolute limit at the stop frequency of a SEM range to be used
in addition to the relative limit if the MAX function is enabled (see
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:
RELative:STOP:FUNCtion
on page 661).
Range: -400 to 400
*RST: -13
Default unit: dBm
Example: SENSe:ESPectrum:RANGe:LIMit:RELative:STOP:
ABSolute -15
For a detailed example see Chapter 10.6.7.10, "Example: SEM
Measurement" , on page 674.
Manual operation: See "Rel Limit Start / Stop <n>" on page 177
Configuring and Performing Measurements