Ronde & Schwarz 1304.0004K03, User Manual

Page: 770 / 1071

Remote Commands
R&S
®
FPL1000
770 User Manual 1178.3370.02 ─ 11
When the display update during remote control is off, this command has no immediate
effect.
Suffix:
<n>
.
Window
<w> subwindow
<t> irrelevant
Parameters:
<Mode> ABSolute
absolute scaling of the y-axis
RELative
relative scaling of the y-axis
*RST:
ABSolute
Example: DISP:TRAC:Y:MODE REL
Manual operation: See "Scaling" on page 318
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition <Position>
This command defines the vertical position of the reference level on the display grid
(for all traces).
The R&S FPL1000 adjusts the scaling of the y-axis accordingly.
For measurements with the optional tracking generator, the command defines the posi-
tion of the reference line.
Suffix:
<n>
.
Window
<t> irrelevant
Parameters:
<Position> 0 PCT corresponds to the lower display border, 100 percent cor-
responds to the upper display border.
*RST:
frequency display: 90 PCT; time display: 50 PCT;
AF spectrum display (K7): 100 PCT;
Default unit: PCT
Example:
DISP:TRAC:Y:RPOS 50PCT
Manual operation: See "Reference Position" on page 296
See "Ref Level Position" on page 317
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y:SPACing <ScalingType>
This command selects the scaling of the y-axis (for all traces, <t> is irrelevant).
Suffix:
<n>
.
Window
<w> subwindow
Setting Basic Spectrum RF Measurement Parameters