Ronde & Schwarz 1304.0004K03, User Manual

Page: 358 / 1071

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
358 User Manual 1178.3370.02 ─ 11
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:X
on page 861
CALCulate<n>:DELTamarker<m>:FUNCtion:FIXed:RPOint:MAXimum[:PEAK]
on page 860
6.9.3 Marker Search Settings and Positioning Functions
Access : "Overview" > "Analysis" > "Marker" > "Search"
or : [MKR TO]
Several functions are available to set the marker to a specific position very quickly and
easily, or to use the current marker position to define another characteristic value. In
order to determine the required marker position, searches may be performed. The
search results can be influenced by special settings.
For more information on searching for signal peaks see Chapter 6.9.4.8, "Marker Peak
List" , on page 383.
The remote commands required to define these settings are described in Chap-
ter 10.8.8.4, "Positioning the Marker" , on page 843.
● Marker Search Settings .........................................................................................358
● Marker Search Settings for Spectrograms ............................................................361
● Positioning Functions ............................................................................................364
6.9.3.1 Marker Search Settings
Access : [MKR TO] > "Search Config"
Markers are commonly used to determine peak values, i.e. maximum or minimum val-
ues, in the measured signal. Configuration settings allow you to influence the peak
search results.
For Spectrograms, special marker settings are available, see Chapter 6.9.3.2, "Marker
Search Settings for Spectrograms" , on page 361.
Marker Usage