Ronde & Schwarz 1304.0004K03, User Manual

Page: 79 / 1071

Applications, Measurement Channels, and Result Displays
R&S
®
FPL1000
79 User Manual 1178.3370.02 ─ 11
5 Applications, Measurement Channels, and
Result Displays
The R&S FPL1000 allows you to perform all sorts of different analysis tasks on differ-
ent types of signals, e.g. Analog Demodulation, I/Q analysis or basic spectrum analy-
sis. Depending on the task or type of signal, a different set of measurement functions
and parameters are required. Therefore, the R&S
FPL1000 provides various applica-
tions - some of which are included in the base unit, others are optional.
The default application when you start the R&S FPL1000 is "Spectrum", for basic spec-
trum analysis measurements on any type of signal.
Channel Setups
When you activate an application, a new channel setup is created which determines
the measurement settings for that application. The same application can be activated
with different measurement settings by creating several channel setups for the same
application.
The number of channel setups that can be configured at the same time depends on the
available memory on the instrument.
For more information on creating channel setups, see Chapter 5.3, "Defining Channel
Setups" , on page 81.
● Available Applications ............................................................................................. 79
● R&S MultiView ........................................................................................................ 81
● Defining Channel Setups ........................................................................................ 81
● Running a Sequence of Measurements ..................................................................83
● Channel Setup Overview ........................................................................................ 87
● Configuring Result Displays ....................................................................................88
5.1 Available Applications
Access : [Mode]
The R&S FPL1000 provides some applications in the base unit while others are availa-
ble only if the corresponding firmware options are installed.
Each application is described in a separate manual.
Spectrograms
Spectrogram measurements are not a separate application, but rather a trace evalua-
tion method in the R&S
FPL1000, thus they are available as an evaluation method in
the "Display Config", not by creating a new channel setup. Spectrograms are config-
ured and activated in the "Trace" settings.
See
Chapter 6.10.2.1, "Working with Spectrograms" , on page 404 for details.
Available Applications