manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 49

Getting Started

R&S

®

FPL1000

49

User Manual 1178.3370.02 ─ 11

d) Drag the "Real/Imag (I/Q)" icon from the evaluation bar to the SmartGrid to

replace the default "Magnitude" display.

Figure 4-11: Inserting a Real/Imag diagram for I/Q analysis

e) Close the SmartGrid mode.

The "IQ Analyzer" measurement channel displays the real and imaginary signal
parts in separate windows.

To display the MultiView tab

An overview of all active measurement channels is provided in the "MultiView" tab.
This tab is always displayed if more than one measurement channel is active and can-
not be closed.

► Tap the "MultiView" tab.

Trying Out the Instrument

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands