manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 21

Getting Started

R&S

®

FPL1000

21

User Manual 1178.3370.02 ─ 11

DC connection

► Connect the DC power connector on the rear panel of the R&S

 

FPL1000 to the DC

power source using a cable as described above.

4.1.5.3

 

Optional Battery Pack (R&S

 

FPL1-B31)

As an alternative to the fixed AC or DC power supply, the R&S

 

FPL1000 also allows for

battery operation. The "Battery Pack" option R&S

 

FPL1-B31 comprises two Li-ion bat-

teries and an internal charger. The internal charger charges the batteries whenever the
instrument is connected to AC or DC power. During operation, if neither DC nor AC
power is supplied, the R&S

 

FPL1000 automatically switches to battery operation.

The battery pack can be retrofitted by Rohde&Schwarz service.

For safety information, see 

"Handling batteries safely"

 

on page 9.

Charging batteries

Charge the batteries before using battery operation for the first time. Following a long
storage period, it can be necessary to charge and discharge the batteries several times
to reach full capacity.

For batteries from third parties, follow the instructions provided by the manufacturer.
For batteries manufactured by Rohde

 

&

 

Schwarz, observe the following:

●

If inserted in the R&S

 

FPL1000, batteries are charged via the common AC or DC

power supply.

●

You can also use the external battery charger R&S

 

FSV-B34 to charge up to 4 bat-

teries.

●

Charge in a temperature range from +0

 

°C to +45

 

°C. If the temperature is above

or below these values, or the temparature varies strongly, charging is interrupted. If
the battery temperature rises above +53

 

°C, charging is stopped.

●

Try not to overcharge the battery too often because overcharging reduces the ser-
vice life of the battery.

When the battery is being charged in standby mode, the [Power] LED blinks. During
operation, the status bar indicates that the battery is being charged.

Remote command to determine the battery charge state:

DIAGnostic:SERVice:BATTery:LEVel?

 

on page 968

Preparing for Use

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands