manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 25

Getting Started

R&S

®

FPL1000

25

User Manual 1178.3370.02 ─ 11

Screen resolution and format

The touchscreen of the R&S

 

FPL1000 is calibrated for a 16:10 format. If you connect a

monitor or projector using a different format (e.g. 4:3), the calibration is not correct and
the screen does not react to your touch actions properly.
The touchscreen has a screen resolution of 1280x800 pixels. Usually, the display of
the external monitor is a duplicate of the instrument's monitor.
If you configure the external monitor to be used as the 

only

 display in the Windows

configuration dialog box ("Show only on 2"), the maximum screen resolution of the
monitor is used. In this case, you can maximize the R&S

 

FPL1000 application window

and see even more details. You cannot change the monitor's screen resolution via the
standard Windows configuration dialog box.
The R&S

 

FPL1000 supports a minimum resolution of 1280x768 pixels.

1. Connect the external monitor to the R&S

 

FPL1000.

2. Press the [Setup] key.

3. Press the "Display" softkey.

4. Select the "Configure Monitor" tab in the "Display" dialog box.

The standard Windows "Screen Resolution" dialog box is displayed.

5. If necessary, change the screen resolution. Consider the information in the note

above.

6. Select the instrument for display:

● "Display 1": internal monitor only
● "Display 2": external monitor only

Preparing for Use

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands