manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 917

Remote Commands

R&S

®

FPL1000

917

User Manual 1178.3370.02 ─ 11

You do not have to use the parameter. If you do not include the
parameter, the command returns a list of all drives in use.
This is the same behavior as if you were using the parameter
OFF.

ON | 1

Returns a list of all drives in use including the folder information.

OFF | 0

Returns a list of all drives in use.

MMEMory:RDIRectory 

<arg0>

This command deletes the indicated directory.

Parameters:

<arg0>

String containing the path of the directory to delete.
Note that the directory you want to remove must be empty.

10.9.2

 

Selecting the Items to Store

The following commands select the items to be included in the configuration file.

Depending on the used command, either the items from the entire instrument
(

MMEMory:SELect[:ITEM]...

), or only those from the currently selected channel

setup (

MMEM:SELect:CHANnel[:ITEM]...

) are stored.

MMEMory:SELect:CHANnel[:ITEM]:ALL

...........................................................................917

MMEMory:SELect[:ITEM]:ALL

......................................................................................... 917

MMEMory:SELect:CHANnel[:ITEM]:DEFault

.....................................................................918

MMEMory:SELect[:ITEM]:DEFault

................................................................................... 918

MMEMory:SELect:CHANnel[:ITEM]:HWSettings

............................................................... 918

MMEMory:SELect[:ITEM]:HWSettings

..............................................................................918

MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL

................................................................. 919

MMEMory:SELect[:ITEM]:LINes:ALL

................................................................................919

MMEMory:SELect:CHANnel[:ITEM]:NONE

....................................................................... 919

MMEMory:SELect[:ITEM]:NONE

..................................................................................... 919

MMEMory:SELect:CHANnel[:ITEM]:SCData

..................................................................... 919

MMEMory:SELect[:ITEM]:SCData

................................................................................... 919

MMEMory:SELect:CHANnel[:ITEM]:SPECtrogram

............................................................ 919

MMEMory:SELect:CHANnel[:ITEM]:SGRam

.....................................................................919

MMEMory:SELect[:ITEM]:SPECtrogram

...........................................................................920

MMEMory:SELect[:ITEM]:SGRam

................................................................................... 920

MMEMory:SELect:CHANnel[:ITEM]:TRACe[:ACTive]

.........................................................920

MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]

.............................................................920

MMEMory:SELect:CHANnel[:ITEM]:TRANsducer:ALL

....................................................... 920

MMEMory:SELect[:ITEM]:TRANsducer:ALL

......................................................................920

MMEMory:SELect:CHANnel[:ITEM]:ALL
MMEMory:SELect[:ITEM]:ALL

This command includes all items when storing or loading a configuration file.

Managing Settings and Results

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands