Remote Commands
R&S
®
FPL1000
976
User Manual 1178.3370.02 ─ 11
SYSTem:REVision[:STRing]
<Name>
Sets the response to the
REV?
query to the defined string (HP emulation only, see
Parameters:
<Name>
Example:
Define the system language:
SYST:LANG '8563E'
Query the revision:
REV?
Response:
920528
Set the response to 'NewRevision':
SYST:REV:STR 'NewRevision'
Query the response:
SYST:REV:STR?
Response:
NewRevision
Manual operation:
See
SYSTem:RSWeep
<State>
Controls a repeated sweep of the E1 and MKPK HI HP model commands (for details
on the commands refer to
Chapter 10.11.2, "Reference: GPIB Commands of Emulated
on page 976). If the repeated sweep is OFF, the marker is set without
sweeping before.
This command is only available if a HP language is selected using
Parameters:
<State>
ON | OFF | 1 | 0
*RST:
0
Example:
SYSTem:RSW ON
Manual operation:
See
10.11.2
Reference: GPIB Commands of Emulated HP Models
The R&S
FPL1000 analyzer family supports a subset of the GPIB commands of HP
models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A, 8566B, 8568A, 8568B
and 8594E.
Despite the differences in system architecture and device features, the supported com-
mands have been implemented in a way to ensure a sufficiently high degree of corre-
spondence with the original.
This includes the support of syntax rules for not only newer device families (B and E
models) but for the previous A family as well.
Emulating Other Instruments' Commands
