Ronde & Schwarz 1304.0004K03, User Manual

Page: 924 / 1071

Remote Commands
R&S
®
FPL1000
924 User Manual 1178.3370.02 ─ 11
MMEMory:STORe<1|2>:STATe:NEXT
This command saves the current instrument configuration in a *.dfl file.
The file name depends on the one you have set with
MMEMory:STORe<1|2>:STATe
on page 923. This command adds a consecutive number to the file name.
Suffix:
<1|2>
.
irrelevant
Example:
MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file
Save.dfl
.
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file
Save_001.dfl
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file
Save_002.dfl
Manual operation: See "Save File" on page 470
MMEMory:STORe<1|2>:TYPE <Type>
This command defines whether the data from the entire instrument or only from the
current channel setup is stored with the subsequent
MMEM:STOR
... command.
Suffix:
<1|2>
.
irrelevant
Parameters:
<Type> INSTrument | CHANnel
INSTrument
Stores data from the entire instrument.
CHANnel
Stores data from an individual channel setup.
*RST:
INST
Example: INST:SEL 'SPECTRUM2'
Selects channel setup
'SPECTRUM2'
.
MMEM:STOR:TYPE CHAN
Specifies that channel setup data is to be stored.
SYSTem:PRESet
This command presets the R&S FPL1000. It is identical to
*RST
.
Example: SYST:PRES
Usage: Event
SYSTem:PRESet:CHANnel[:EXEC]
This command restores the default instrument settings in the current channel setup.
Managing Settings and Results